Details
Advantages:
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Advantages 1:
Innovative quick-mounting system guarantees convenient handling and cool grinding
Advantages 2:
Minimized tooth chipping/breakage, splintering, and bur failures due to very robust, high-performance cut.
Advantages 3:
Can also be used at a lower rotational speed.
Advantages 4:
Due to their extreme impact resistance, they are an ideal option when an extended-shank bur is needed.
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 1:
High-performance TOUGH cut
Length (Packaging unit) UNIT:
MANUFACTURER_TYPE_DESCR:
SPG 1225/6,35 TOUGH SL150
Materials that can be worked:
Materials that can be worked 1:
Black annealed cast iron (GTS, GJMB)
Materials that can be worked 10:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 11:
Steels over 220 HV (> 95 HB)
Materials that can be worked 12:
Steels up to 220 HV (< 95 HB)
Materials that can be worked 13:
Materials that can be worked 14:
White annealed cast iron (GTW, GJMW)
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Materials that can be worked 6:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 7:
Materials that can be worked 8:
Materials that can be worked 9:
Steel materials with a hardness > 54 HRC
Output name <= 80 characters:
PFERD Carbide Bur SG-5L6 Pointed Tree Shape TOUGH Double Cut 1/2" x 1" x 1/4" Shank
Product issue name web for bmecat:
High-performance tungsten carbide burs, TOUGH cut, Tree bur with pointed end - Shape G
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Observe the recommended rotational speed.
Recommendations for use 1:
The TOUGH cut can be used on materials up to 580 HV (54 HRC). For hard materials, it is recommended to test the bur on the same material before using on the actual workpiece.
Recommendations for use 2:
TOUGH cut carbide burs are also designed for high-impact applications when using shank extensions, for applications with a high surface contact angle, for work on narrow contours, and for applications where slower rotational speeds are used.
Recommendations for use 3:
The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
Recommendations for use 4:
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.
REFERENCE_FEATURE_GROUP_ID:
RPM from, grey cast iron, white cast iron:
RPM from, grey cast iron, white cast iron UNIT:
RPM from, hardened, heat-treated steels over 370 H:
RPM from, steels up to 370 HV (38 HRC):
RPM from, steels up to 370 HV (38 HRC) UNIT:
RPM to, grey cast iron, white cast iron:
RPM to, grey cast iron, white cast iron UNIT:
RPM to, hardened, heat-treated steels over 370 HV:
RPM to, steels up to 370 HV (38 HRC):
RPM to, steels up to 370 HV (38 HRC) UNIT:
Safety notes:
For safety reasons, the maximum application speeds with contact with the workpiece require a reduction in the recommended speed of tungsten carbide burs with standard shanks. Observe the reduced speeds outlined in the product details.
Safety notes 1:
When working with longer shanks, it is crucial that the bur is in contact with the workpiece (or inserted in the hole or slot to be machined) before the power tool is turned on. As a rule, the bur must remain in contact with the workpiece for as long as th
Safety notes 2:
Not designed for robotic or stationary applications due to risk of bending. Use only rigid clamping systems/power tools.
SEGMENT:
Milling, holemaking and deburring products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
