Details
Advantages:
Excellent stock removal rate and service life due to innovative tooth design.
Advantages 1:
Creates high quality surface finish with optimized material chipping.
Advantages 2:
Workpiece is protected through much lower thermal load.
Advantages 3:
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 1:
High-performance INOX cut
KEYWORD 2:
Tree shape with radius end RBF
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 2:
Materials that can be worked 3:
Output name <= 80 characters:
PFERD Carbide Bur SF-5 Tree Shape INOX Cut 1/2" x 1" x 1/4" Shank
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends INOX cut burs for preventing fatigue, saving resources, and producing excellent work.
PFERDERGONOMICS:
PFERDERGONOMICS recommends INOX cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.
Product issue name web for bmecat:
High-performance tungsten carbide burs, INOX cut, Tree bur with radius end - Shape F
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Recommendations for use 1:
Observe the recommended rotational speed.
Recommendations for use 2:
The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
Recommendations for use 3:
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.
REFERENCE_FEATURE_GROUP_ID:
RPM from, hard non-ferrous metals:
RPM from, hard non-ferrous metals UNIT:
RPM from, rust and acid-resistant steels:
RPM from, rust and acid-resistant steels UNIT:
RPM from, soft non-ferrous metals:
RPM from, soft non-ferrous metals UNIT:
RPM to, hard non-ferrous metals:
RPM to, hard non-ferrous metals UNIT:
RPM to, rust and acid-resistant steels:
RPM to, rust and acid-resistant steels UNIT:
RPM to, soft non-ferrous metals:
RPM to, soft non-ferrous metals UNIT:
Safety notes:
Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.
SEGMENT:
Milling, holemaking and deburring products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
