Details
Advantages 1:
Can be used with any conventional straight grinder.
Advantages 3:
Special design allows for precise handling.
Advantages 4:
Safe and comfortable to guide.
Advantages 5:
Creates exact edge shapes in one single step.
Advantages 6:
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Applications 5:
Working on edges (chamfering, rounding)
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 1:
High-performance EDGE cut
KEYWORD 2:
Cone counterbore EDGE 30°
Length (Packaging unit) UNIT:
Length, construction UNIT:
MANUFACTURER_TYPE_DESCR:
KSK 1603/6,35 EDGE 45° ECS
Materials that can be worked:
Materials that can be worked 1:
Black annealed cast iron (GTS, GJMB)
Materials that can be worked 10:
White annealed cast iron (GTW, GJMW)
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Materials that can be worked 8:
Materials that can be worked 9:
Output name <= 80 characters:
PFERD Bearing Carbide Bur SK-6 EDGE Cut 45° 5/8" x 1/8", 1/4
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends EDGE cut burs for preventing fatigue, saving resources, and producing excellent work.
Product issue name web for bmecat:
High-performance tungsten carbide burs, EDGE cut, Conical counterbore - Shape K
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Use the burs counterrotationally for quick stock removal. For a fine surface finish, run the bur back over the edges in the same direction of rotation.
Recommendations for use 1:
If possible, use burs with the EDGE cut with the PFERD compressed-air straight grinder PG 3/210 with the matching guide sleeve EFH PG 3/210.
Recommendations for use 2:
The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
REFERENCE_FEATURE_GROUP_ID:
RPM from, grey cast iron, white cast iron:
RPM from, grey cast iron, white cast iron UNIT:
RPM from, hard non-ferrous metals:
RPM from, hard non-ferrous metals UNIT:
RPM from, hardened, heat-treated steels over 370 H:
RPM from, high-temperature-resistant materials:
RPM from, high-temperature-resistant materials UNI:
RPM from, soft non-ferrous metals:
RPM from, soft non-ferrous metals UNIT:
RPM from, steels up to 370 HV (38 HRC):
RPM from, steels up to 370 HV (38 HRC) UNIT:
RPM to, grey cast iron, white cast iron:
RPM to, grey cast iron, white cast iron UNIT:
RPM to, hard non-ferrous metals:
RPM to, hard non-ferrous metals UNIT:
RPM to, hardened, heat-treated steels over 370 HV:
RPM to, high-temperature-resistant materials:
RPM to, high-temperature-resistant materials UNIT:
RPM to, soft non-ferrous metals:
RPM to, soft non-ferrous metals UNIT:
RPM to, steels up to 370 HV (38 HRC):
RPM to, steels up to 370 HV (38 HRC) UNIT:
SEGMENT:
Milling, holemaking and deburring products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
