Details
Advantages:
Up to 50% higher stock removal rate on steel and cast steel in comparison to conventional double cut burs.
Advantages 1:
Significantly increased aggressiveness, creates large chips, and has very good chip removal due to its innovative tooth design.
Advantages 2:
Workpieces are protected due to significantly lower thermal load.
Advantages 3:
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 1:
High-performance STEEL cut
KEYWORD 2:
Conical shape with radius end, shape L
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 2:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 6:
Steels over 220 HV (> 95 HB)
Materials that can be worked 7:
Steels up to 220 HV (< 95 HB)
Materials that can be worked 8:
Output name <= 80 characters:
PFERD Carbide Bur SL-3 14° Taper STEEL Cut 3/8" x 1-1/16" x 1/4" Shank
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends STEEL cut burs for preventing fatigue, saving resources, and producing excellent work.
PFERDERGONOMICS:
PFERDERGONOMICS recommends STEEL cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.
Product issue name web for bmecat:
High-performance tungsten carbide burs, STEEL cut, 14° Taper bur with radius end – Shape L
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Recommendations for use 1:
Observe the recommended rotational speed.
Recommendations for use 2:
The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
Recommendations for use 3:
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.
REFERENCE_FEATURE_GROUP_ID:
RPM from, hardened, heat-treated steels over 370 H:
RPM from, steels up to 370 HV (38 HRC):
RPM from, steels up to 370 HV (38 HRC) UNIT:
RPM to, hardened, heat-treated steels over 370 HV:
RPM to, steels up to 370 HV (38 HRC):
RPM to, steels up to 370 HV (38 HRC) UNIT:
Safety notes:
Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.
SEGMENT:
Milling, holemaking and deburring products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
