Details
Advantages:
Used for removing material in long chips. Coating creates barrier between bur and workpiece which prevents loading of non-ferrous metals.
Advantages 1:
Maximum stock removal rate.
Advantages 2:
Effective chip removal due to improved anti-adhesion properties.
Advantages 5:
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 1:
High-performance ALU cut with HICOAT® coating HC-NFE
Length (Packaging unit) UNIT:
MANUFACTURER_TYPE_DESCR:
KUD 12,7x11,1x6,35 ALU HC-NFE
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Materials that can be worked 11:
Materials that can be worked 12:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Materials that can be worked 8:
Materials that can be worked 9:
Output name <= 80 characters:
PFERD HICOAT® Carbide Bur SD-5 Ball Shape ALU Cut 1/2" x 7/16" x 1/4" Shank
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends HICOAT® coated burs for preventing fatigue, saving resources, and producing excellent work.
Product issue name web for bmecat:
High-performance tungsten carbide burs, ALU/Non-Ferrous cut, HI-COAT NFE, Ball bur - Shape D
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Recommendations for use 1:
Observe the recommended rotational speed.
Recommendations for use 2:
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.
REFERENCE_FEATURE_GROUP_ID:
RPM from, hard non-ferrous metals:
RPM from, hard non-ferrous metals UNIT:
RPM from, soft non-ferrous metals:
RPM from, soft non-ferrous metals UNIT:
RPM from, thermoplastics, fibre-reinforced plastic:
RPM to, hard non-ferrous metals:
RPM to, hard non-ferrous metals UNIT:
RPM to, soft non-ferrous metals:
RPM to, soft non-ferrous metals UNIT:
RPM to, thermoplastics, fibre-reinforced plastics:
SEGMENT:
Milling, holemaking and deburring products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
