Details
Advantages 1:
Unlike with abrasive mounted points, there is no change in geometry due to wear and tear.
Advantages 2:
Work on almost all materials up to 940 HV (68 HRC).
Advantages 3:
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 1:
High-performance MICRO cut
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Black annealed cast iron (GTS, GJMB)
Materials that can be worked 10:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 11:
Materials that can be worked 12:
Materials that can be worked 13:
Materials that can be worked 14:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 15:
Steels over 220 HV (> 95 HB)
Materials that can be worked 16:
Steels up to 220 HV (< 95 HB)
Materials that can be worked 17:
Materials that can be worked 18:
Materials that can be worked 19:
Materials that can be worked 2:
Materials that can be worked 20:
White annealed cast iron (GTW, GJMW)
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Materials that can be worked 8:
Materials that can be worked 9:
Hardened, heat-treated steels over 370 HV (38 HRC)
Output name <= 80 characters:
PFERD Carbide Bur SG-3 Pointed Tree Shape MICRO Cut 3/8" x 3/4" x 1/4" Shank
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends MICRO cut burs for preventing fatigue, saving resources, and producing excellent work.
PFERDERGONOMICS:
PFERDERGONOMICS recommends MICRO cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.
Product issue name web for bmecat:
High-performance tungsten carbide burs, MICRO cut, Tree bur with pointed end - Shape G
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Ideal for finishing, very fine cleaning work, corrections in tool and mold construction, and for sharpening cutting tools.
Recommendations for use 1:
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Recommendations for use 2:
Observe the recommended rotational speed.
Recommendations for use 3:
The smaller the bur diameter is in the area being used, the higher the recommended rotational speed can be.
Recommendations for use 4:
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.
REFERENCE_FEATURE_GROUP_ID:
RPM from, grey cast iron, white cast iron:
RPM from, grey cast iron, white cast iron UNIT:
RPM from, hard non-ferrous metals:
RPM from, hard non-ferrous metals UNIT:
RPM from, hardened, heat-treated steels over 370 H:
RPM from, high-temperature-resistant materials:
RPM from, high-temperature-resistant materials UNI:
RPM from, rust and acid-resistant steels:
RPM from, rust and acid-resistant steels UNIT:
RPM from, steels up to 370 HV (38 HRC):
RPM from, steels up to 370 HV (38 HRC) UNIT:
RPM to, grey cast iron, white cast iron:
RPM to, grey cast iron, white cast iron UNIT:
RPM to, hard non-ferrous metals:
RPM to, hard non-ferrous metals UNIT:
RPM to, hardened, heat-treated steels over 370 HV:
RPM to, high-temperature-resistant materials:
RPM to, high-temperature-resistant materials UNIT:
RPM to, rust and acid-resistant steels:
RPM to, rust and acid-resistant steels UNIT:
RPM to, steels up to 370 HV (38 HRC):
RPM to, steels up to 370 HV (38 HRC) UNIT:
SEGMENT:
Milling, holemaking and deburring products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
