Details
Advantages:
Significantly better stock removal rate than conventional double cut burs.
Advantages 1:
Saves time and money with very high stock removal rate on key materials.
Advantages 2:
Comfortable working with reduced vibration and less noise.
Advantages 3:
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 1:
High-performance OMNI cut
KEYWORD 2:
Cylindrical shape with radius end
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Black annealed cast iron (GTS, GJMB)
Materials that can be worked 10:
Materials that can be worked 11:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 12:
Materials that can be worked 13:
Materials that can be worked 14:
Materials that can be worked 15:
Materials that can be worked 16:
Steel materials with a hardness > 54 HRC
Materials that can be worked 17:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 18:
Steels over 220 HV (> 95 HB)
Materials that can be worked 19:
Steels up to 220 HV (< 95 HB)
Materials that can be worked 2:
Materials that can be worked 20:
Materials that can be worked 21:
Materials that can be worked 22:
Materials that can be worked 23:
White annealed cast iron (GTW, GJMW)
Materials that can be worked 24:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Materials that can be worked 8:
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Materials that can be worked 9:
Output name <= 80 characters:
PFERD Carbide Bur SC-3 Cylindrical Radius End OMNI Double Cut 3/8" x 3/4" x 1/4" Shank
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends OMNI cut burs for preventing fatigue, saving resources, and producing excellent work.
PFERDERGONOMICS:
PFERDERGONOMICS recommends OMNI cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.
Product issue name web for bmecat:
High-performance tungsten carbide burs, OMNI double cut, Cylindrical bur with radius end - Shape C
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Recommendations for use 1:
Observe the recommended rotational speed.
Recommendations for use 2:
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.
REFERENCE_FEATURE_GROUP_ID:
RPM from, grey cast iron, white cast iron:
RPM from, grey cast iron, white cast iron UNIT:
RPM from, hard non-ferrous metals:
RPM from, hard non-ferrous metals UNIT:
RPM from, hardened, heat-treated steels over 370 H:
RPM from, rust and acid-resistant steels:
RPM from, rust and acid-resistant steels UNIT:
RPM from, soft non-ferrous metals:
RPM from, soft non-ferrous metals UNIT:
RPM from, steels up to 370 HV (38 HRC):
RPM from, steels up to 370 HV (38 HRC) UNIT:
RPM to, grey cast iron, white cast iron:
RPM to, grey cast iron, white cast iron UNIT:
RPM to, hard non-ferrous metals:
RPM to, hard non-ferrous metals UNIT:
RPM to, hardened, heat-treated steels over 370 HV:
RPM to, rust and acid-resistant steels:
RPM to, rust and acid-resistant steels UNIT:
RPM to, soft non-ferrous metals:
RPM to, soft non-ferrous metals UNIT:
RPM to, steels up to 370 HV (38 HRC):
RPM to, steels up to 370 HV (38 HRC) UNIT:
Safety notes:
Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.
SEGMENT:
Milling, holemaking and deburring products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
