Details
Advantages:
Extremely high stock removal rate.
Advantages 2:
Reduced material adhesion.
Advantages 3:
Long service life and smooth running.
Advantages 4:
Can be used with peripheral speeds of up to 3,600 SFPM.
Advantages 5:
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
KEYWORD 2:
Cylindrical shape with end cut
Length (Packaging unit) UNIT:
MANUFACTURER_TYPE_DESCR:
ZYAS 6,35x12,7x3,17 C ALU
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Materials that can be worked 11:
Materials that can be worked 12:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Materials that can be worked 8:
Materials that can be worked 9:
Output name <= 80 characters:
PFERD Carbide Bur SB-51 Cylindrical End Cut ALU Cut 1/4" x 1/2" x 1/8" Shank
Product issue name web for bmecat:
High-performance tungsten carbide burs, ALU/Non-Ferrous cut, Cylindrical with end cut - Shape B
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Recommendations for use 1:
Observe the recommended rotational speed.
Recommendations for use 2:
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/8" shank diameter, use power tools with a power output of 75 to 300 watts.
REFERENCE_FEATURE_GROUP_ID:
RPM from, hard non-ferrous metals:
RPM from, hard non-ferrous metals UNIT:
RPM from, soft non-ferrous metals:
RPM from, soft non-ferrous metals UNIT:
RPM from, thermoplastics, fibre-reinforced plastic:
RPM to, hard non-ferrous metals:
RPM to, hard non-ferrous metals UNIT:
RPM to, soft non-ferrous metals:
RPM to, soft non-ferrous metals UNIT:
RPM to, thermoplastics, fibre-reinforced plastics:
SEGMENT:
Milling, holemaking and deburring products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
