Details
Advantages:
Cost-effective sawing of round cut-outs.
Advantages 1:
Alternating tooth pitch prevents chattering during sawing.
Advantages 4:
The hole saw is conveniently centred and guided via the replaceable bi-metal pilot drill.
Advantages 5:
Hole saw arbor comes with an ejection spring for improved ejection of the cut material.
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
INTERNATIONAL_PID (gtin):
KEYWORD 2:
Thread version 1/2-20, suitable arbors: 29033, 29036
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Materials that can be worked 11:
Materials that can be worked 12:
Materials that can be worked 13:
Materials that can be worked 14:
Materials that can be worked 15:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 16:
Steels up to 220 HV (< 95 HB)
Materials that can be worked 17:
Materials that can be worked 18:
Materials that can be worked 19:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Materials that can be worked 8:
Materials that can be worked 9:
Ordering notes:
Please order hole saw arbors separately.
Output name <= 80 characters:
PFERD 1-1/16" Bi-Metal Hole Saw
Product issue name web for bmecat:
HSS hole saws thread version 1/2-20 UNF
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Observe the recommended rotational speed.
Recommendations for use 1:
Clamp the pilot drill in the hole saw arbor and make sure that it projects at least 1/8" over the teeth of the hole saw.
Recommendations for use 2:
When cutting metals, use a high-quality cutting oil, if possible. This facilitates smooth running and extends the hole saw service life. Exception: when working on aluminum, use kerosene instead of cutting oil.
Recommendations for use 3:
Bi-metal hole saws are suitable for work on stainless steel (INOX). In order to avoid corrosion, remove any particles that develop from the workpiece during work. Clean the workpiece chemically or mechanically (etching/polishing, etc.).
Recommendations for use 4:
Make sure that all the teeth are applied evenly. To prevent tooth breakage, avoid swinging movements during sawing.
Recommendations for use 5:
Avoid overheating the saw.
Recommendations for use 6:
Observe the maximum cutting depth.
REFERENCE_FEATURE_GROUP_ID:
RPM from, rust and acid-resistant steels:
RPM from, rust and acid-resistant steels UNIT:
RPM from, soft non-ferrous metals:
RPM from, soft non-ferrous metals UNIT:
RPM from, steels up to 370 HV (38 HRC):
RPM from, steels up to 370 HV (38 HRC) UNIT:
RPM from, thermoplastics, fibre-reinforced plastic:
Safety notes:
When using shank extensions, the recommended hole saw rotational speed must not be exceeded in order to prevent accidents.
SEGMENT:
Milling, holemaking and deburring products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
