Details
Advantages:
Abrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.
Advantages 1:
Outstanding service life even under the toughest work conditions, due to special manufacturing.
Advantages 2:
Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.
Applications 1:
Step-by-step fine grinding
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
INTERNATIONAL_PID (gtin):
KEYWORD 1:
Abrasive spiral bands, cylindrical
KEYWORD 2:
Zirconia alumina Z-COOL version
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Materials that can be worked 11:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Materials that can be worked 5:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 6:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 7:
Materials that can be worked 8:
Steel materials with a hardness > 54 HRC
Materials that can be worked 9:
Steels up to 370 HV (< 38 HRC)
Ordering notes:
Please order rubber drum holder separately.
Output name <= 80 characters:
PFERD Spiral Band, 1-1/8" x 1-1/8, Cylindrical Shape,36 Grit,Zirconia aluminuma Z-COOL
Product issue name web for bmecat:
Abrasive spiral bands, cylindrical
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.
Recommendations for use 1:
To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.
Recommendations for use 2:
For the best performance, use with a recommended peripheral speed of 4,000-6,000 SFPM.
Recommendations for use 3:
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
REFERENCE_FEATURE_GROUP_ID:
Safety notes:
The maximum permitted peripheral speed is 6,000 SFPM.
Safety notes 1:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Safety notes 2:
Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.
SEGMENT:
Fine grinding and finishing products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
