Details
Subcategory:
Sanding Belts, Discs and Kits
Advantages:
Reduced down time due to quick changes.
Advantages 1:
Convenient to use due to simple handling and low-vibration working.
Advantages 2:
No operational disruptions caused by sticking, slipping, or disengaging.
Applications 1:
Step-by-step fine grinding
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
INTERNATIONAL_PID (gtin):
KEYWORD 1:
COMBIDISC® abrasive discs
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 11:
Materials that can be worked 12:
Materials that can be worked 13:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 6:
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Materials that can be worked 7:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 8:
Materials that can be worked 9:
Steel materials with a hardness > 54 HRC
Ordering notes:
Please order backing pad separately.
Output name <= 80 characters:
PFERD COMBIDISC® Abrasive Disc, 2" Dia, Type CD, 80 Grit, Aluminum oxide
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends COMBIDISC® products to reduce disc change and setup times.
PFERDERGONOMICS:
PFERDERGONOMICS recommends COMBIDISC® as an innovative solution to reduce vibration, noise and dust produced during use and to improve comfort when working.
Product issue name web for bmecat:
COMBIDISC abrasive discs CD/CDR
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Use COMBIDISC® grinding discs with arbors or abrasive disc holders on flexible shaft drives with angle handpieces, compressed-air or electric angle grinders.
Recommendations for use 1:
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
REFERENCE_FEATURE_GROUP_ID:
Safety notes:
The maximum permitted peripheral speed is 9,800 SFPM.
Safety notes 1:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
SEGMENT:
Fine grinding and finishing products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
