PFERD COMBIDISC® Abrasive Disc, 2" Dia, Type CDR, 240 Grit, Silicon carbide
For universal grinding work, especially for use on titanium alloys. Ideal for the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components. The CDR clamping system has a threaded connection with male thread (plastic). Also compatible with the following commonly used systems: Roloc™, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On.
Details
Subcategory:
Sanding Belts, Discs and Kits
Advantages:
Reduced down time due to quick changes.
Advantages 1:
Convenient to use due to simple handling and low-vibration working.
Advantages 2:
No operational disruptions caused by sticking, slipping, or disengaging.
Applications 1:
Step-by-step fine grinding
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
INTERNATIONAL_PID (gtin):
KEYWORD 1:
COMBIDISC® abrasive discs
KEYWORD 2:
Silicon carbide SiC version
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 2:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Ordering notes:
Please order backing pad separately.
Output name <= 80 characters:
PFERD COMBIDISC® Abrasive Disc, 2" Dia, Type CDR, 240 Grit, Silicon carbide
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends COMBIDISC® products to reduce disc change and setup times.
PFERDERGONOMICS:
PFERDERGONOMICS recommends COMBIDISC® as an innovative solution to reduce vibration, noise and dust produced during use and to improve comfort when working.
Product issue name web for bmecat:
COMBIDISC abrasive discs CD/CDR
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Use COMBIDISC® grinding discs with arbors or abrasive disc holders on flexible shaft drives with angle handpieces, compressed-air or electric angle grinders.
Recommendations for use 1:
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
REFERENCE_FEATURE_GROUP_ID:
Safety notes:
The maximum permitted peripheral speed is 9,800 SFPM.
Safety notes 1:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
SEGMENT:
Fine grinding and finishing products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
