Details
Advantages:
Conforms to contours due to high flexibility.
Advantages 1:
Consistently high stock removal rate throughout the entire service life as new, aggressive abrasive is constantly exposed.
Advantages 2:
Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design.
Applications 1:
Step-by-step fine grinding
Applications 3:
Structuring (matt finishing, brush matting and satin finishing)
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
INTERNATIONAL_PID (gtin):
KEYWORD 2:
Silicon carbide SiC version
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 2:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Output name <= 80 characters:
PFERD Mounted Flap Wheel, 3" x 1, 80 Grit, 1/4" Shank, Silicon carbide
PFERDERGONOMICS:
PFERDERGONOMICS recommends mounted flap wheels to reduce vibration and noise produced during use and to improve comfort when working.
Product issue name web for bmecat:
prop65:
Warning: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
Recommendations for use:
Flap wheel wear and the thermal load on the workpiece are reduced by decreasing the contact pressure and peripheral speed, and by adding grinding oil.
Recommendations for use 1:
Stock removal rate should be increased by using a coarser grit, not by increasing the contact pressure. This avoids unnecessary flap wheel wear and prevents the thermal load of the workpiece.
Recommendations for use 2:
Increasing the speed results in a slightly finer surface quality. An increase in contact pressure results in a slightly coarser surface. The softer the workpiece material, the coarser the resulting surface (when using the same grit size).
Recommendations for use 3:
For the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
Recommendations for use 4:
Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
REFERENCE_FEATURE_GROUP_ID:
Safety notes:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Safety notes 1:
The contact pressure has to be reduced significantly when the optimum rotational speed is exceeded.
Safety notes 2:
Ensure the clamping depth is at least 5/8" and the specified maximum rotational speed is not exceeded with unsupported shank lengths.
SEGMENT:
Fine grinding and finishing products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
