Details
Advantages:
Conforms to contours due to high flexibility.
Advantages 1:
Cool grinding and low thermal load on the workpiece.
Advantages 2:
The open structure and high flexibility of the non-woven material prevents loading.
Applications 2:
Step-by-step fine grinding
Applications 4:
Structuring (matt finishing, brush matting and satin finishing)
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
INTERNATIONAL_PID (gtin):
KEYWORD 1:
POLINOX® mounted flap wheels, radial construction
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Steel materials with a hardness > 54 HRC
Materials that can be worked 11:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 12:
Materials that can be worked 13:
Materials that can be worked 14:
Materials that can be worked 15:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 7:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 8:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 9:
Output name <= 80 characters:
PFERD POLINOX® Mounted Flap Wheel, 2-3/8" x 2,100 Grit,Radial,1/4"Shank,Aluminum Oxide
PFERDERGONOMICS:
PFERDERGONOMICS recommends POLINOX® mounted flap wheels to reduce vibration and noise produced during use and to improve comfort when working.
Product issue name web for bmecat:
POLINOX mounted grinding wheels PNL
prop65:
Warning: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
Recommendations for use:
For the best performance, use with a recommended peripheral speed of 2,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and flap wheel/cross buff wear.
REFERENCE_FEATURE_GROUP_ID:
Safety notes:
The maximum permitted peripheral speed is 6,300 SFPM.
Safety notes 1:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
SEGMENT:
Fine grinding and finishing products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
