Details
Advantages:
Cost-effective due to high abrasive performance and durability.
Advantages 1:
Produces very good surface quality.
Advantages 2:
Can be profiled as desired, enabling optimal adjustment to the contour.
Applications 2:
Step-by-step fine grinding
Applications 4:
Structuring (matt finishing, brush matting and satin finishing)
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
INTERNATIONAL_PID (gtin):
KEYWORD 1:
POLINOX® convolute wheels
KEYWORD 2:
Silicon carbide SiC version
Length (Packaging unit) UNIT:
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Steel materials with a hardness > 54 HRC
Materials that can be worked 11:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 12:
Materials that can be worked 13:
Materials that can be worked 14:
Materials that can be worked 15:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Fibre-reinforced thermosetting plastics (GRP, CRP)
Materials that can be worked 7:
Hardened, heat-treated steels over 370 HV (38 HRC)
Materials that can be worked 8:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 9:
Output name <= 80 characters:
PFERD POLINOX® Convolute Wheel, 6" x 1 x 1, Fine, Hard, 9SF, Silicon carbide
PFERDERGONOMICS:
PFERDERGONOMICS recommends POLINOX® convolute wheels to reduce vibration, noise, and dust produced during use and to improve comfort when working.
Product issue name web for bmecat:
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Considerably reduce peripheral speed for work on materials with poor heat-conducting properties, e.g. titanium and stainless steel.
Recommendations for use 1:
For the best performance, use with a recommended peripheral speed of 4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
REFERENCE_FEATURE_GROUP_ID:
Safety notes:
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
Safety notes 1:
The spiral-wound construction requires that these wheels only be run in a single indicated direction. Failure to do so will lead to destruction of the wheel and increased risk of accidents.
SEGMENT:
Fine grinding and finishing products
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
