Details
Subcategory:
Abrasive Brushes and Wheel Kits
Advantages:
Long tool life and aggressive brushing action due to a very high filament density.
Advantages 1:
Extremely smooth operation due to evenly distributed filament material.
Advantages 2:
The bridle prevents the wires spreading out sideways.
Advantages 3:
If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behavior.
Advantages 4:
The bridle enables the spreading out and flexibility of the brush filament to be controlled.
Advantages 5:
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Advantages 6:
For particularly aggressive machining and for creating a high surface quality.
Applications 2:
Structuring (matt finishing, brush matting and satin finishing)
Dia. filament material UNIT:
Diam. arbor hole with adapter:
Diam. arbor hole with adapter UNIT:
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
INTERNATIONAL_PID (gtin):
KEYWORD 3:
COMPOSITE / with ring / with hole
Length (Packaging unit) UNIT:
Length, filament to ring:
Length, filament to ring UNIT:
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Soft titanium alloys (tensile strength 500 N/mm²)
Materials that can be worked 11:
Materials that can be worked 12:
Steel materials with a hardness > 54 HRC
Materials that can be worked 13:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 14:
Materials that can be worked 15:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
High-temperature-resistant materials
Materials that can be worked 7:
Nickel-based alloys (e.g. Inconell and Hastelloy)
Materials that can be worked 8:
Nickel or titanium-based superalloys
Materials that can be worked 9:
Ordering notes:
This composite disc brush comes with two drive pin holes with a 1/4" diameter.
Output name <= 80 characters:
PFERD M-BRAD® Disc Brush - High Density 3" Dia. .040/120 Grit Ceramic Oxide 7/8" Arbor
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends composite brushes to achieve maximum stock removal as quickly as possible.
PFERDERGONOMICS:
PFERDERGONOMICS recommends composite brushes to sustainably reduce the vibrations produced during use.
Product issue name web for bmecat:
Composite disc brushes crimped Composite, with bridle, with hole
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Please observe the recommended rotational speeds.
Recommendations for use 1:
Use coolant for applications where large amounts of heat are produced.
Recommendations for use 2:
Remove the bridle once the filament is worn down. Then the rest of the filament can be used.
Recommendations for use 3:
Remove the bridle before starting work if you would like to achieve a large spreading diameter or access hard-to-reach areas.
REFERENCE_FEATURE_GROUP_ID:
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
