Details
Advantages:
Long tool life and aggressive brushing action due to a very high filament density.
Advantages 1:
Extremely smooth operation due to evenly distributed filament material.
Advantages 2:
If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behavior.
Advantages 3:
The bridle enables the spreading out and flexibility of the brush filament to be controlled.
Advantages 4:
The bridle prevents the wires spreading out sideways.
Advantages 5:
Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip.
Applications 3:
Structuring (matt finishing, brush matting and satin finishing)
Dia. filament material UNIT:
Gross weight (Piece) UNIT:
Height (Packaging unit) UNIT:
INTERNATIONAL_PID (gtin):
KEYWORD 3:
COMPOSITE / with ring / shank-mounted
Length (Packaging unit) UNIT:
Length, filament to ring:
Length, filament to ring UNIT:
MANUFACTURER_TYPE_DESCR:
DBUR 75/6,35 SiC 120 1,10
Materials that can be worked:
Materials that can be worked 1:
Materials that can be worked 10:
Steels up to 370 HV (< 38 HRC)
Materials that can be worked 11:
Materials that can be worked 12:
Materials that can be worked 2:
Materials that can be worked 3:
Materials that can be worked 4:
Materials that can be worked 5:
Materials that can be worked 6:
Materials that can be worked 7:
Materials that can be worked 8:
Materials that can be worked 9:
Steel materials with a hardness > 54 HRC
Output name <= 80 characters:
PFERD M-BRAD® Mounted Disc Brush 3" Dia. .040/120 Grit Silicon Carbide 1/4" Shank
PFERDEFFICIENCY:
PFERDEFFICIENCY recommends composite brushes to achieve maximum stock removal as quickly as possible.
PFERDERGONOMICS:
PFERDERGONOMICS recommends composite brushes to sustainably reduce the vibrations produced during use.
Product issue name web for bmecat:
Composite disc brushes crimped Composite, with bridle, shank-mounted
prop65:
Warning: Cancer -- www.P65Warnings.ca.gov
Recommendations for use:
Please observe the recommended rotational speeds.
Recommendations for use 1:
Use coolant for applications where large amounts of heat are produced.
Recommendations for use 2:
Remove the bridle once the filament is worn down. Then the rest of the filament can be used.
Recommendations for use 3:
Remove the bridle before starting work if you would like to achieve a large spreading diameter or access hard-to-reach areas.
REFERENCE_FEATURE_GROUP_ID:
Safety notes:
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.
SPECIAL_TREATMENT_CLASS:
Warning: Cancer -- www.P65Warnings.ca.gov
Volume (Packaging unit) UNIT:
Width (Packaging unit) UNIT:
