20mm Diam. Slitting Saw, 3mm Thick, 5mm ID, 20 teeth
Our precision ground 20mm diameter solid carbide saws are best used for tougher materials like steel, stainless, and super alloys. They have 20 teeth with a 5 degree rake angle, and a 5mm inside diameter. The saws are ground with ultra-precision tolerances, with thickness held to +.0002"/-0.0000". Typical depth of cut per pass is about 2 times the saw thickness. If the total depth of cut is more than 5 times the saw thickness or you need to have a slitting saw with the highest performance see the
MK20-05-20 series saw. The recommended maximum total depth of cut with a M20-05-20 using an
MSA-05 saw arbor is 0.107".
