1.25-in Diam. Slitting Saw, 0.025-in Thick, 0.5-in ID, 36 teeth
Our precision ground 1.250" diameter solid carbide saws are best used for tougher materials like steel, stainless, and super alloys. They have 36 teeth with a 5 degree rake angle, and a 0.500" inside diameter. The saws are ground with ultra-precision tolerances, with thickness held to +.0002"/-0.0000". Typical depth of cut per pass is about 2 times the saw thickness. If the total depth of cut is more than 5 times the saw thickness, or you need to have a slitting saw with the highest performance, try the
K12-16-36 series saw. The recommended maximum total depth of cut with a C12-16-36 using an
AB-500 saw arbor is 0.200". For more gripping force and a maximum depth of 0.148" (using a .050" clearance cushion), use an
NAB-500 saw arbor.
