1.5-in Diam. Slitting Saw, 0.1562-in Thick, 0.5-in ID, 16 teeth
Our precision ground 1.500" diameter solid carbide saws are best used for non-ferrous materials, such as aluminum, copper, and plastics. They have 16 teeth with a 10 degree rake angle, and a 0.500" inside diameter. The saws are ground with ultra-precision tolerances, with thickness held to +.0002"/-0.0000". Typical depth of cut per pass is about 4 times the saw thickness. If the total depth of cut is more than 5 times the saw thickness, or you need to have a slitting saw with the highest performance, try the
K15-16-16 series saw. The recommended maximum total depth of cut with a C15-16-16 using an
AB-500 saw arbor is 0.325". For more gripping force and a maximum depth of 0.273" (using a .050" clearance cushion), use an
NAB-500 saw arbor.
