100mm Diam. Slitting Saw, 2mm Thick, 22mm ID, 36 teeth
Our precision ground 100mm diameter solid carbide saws are best used for non-ferrous materials, such as aluminum, copper, and plastics. They have 36 teeth with a 10 degree rake angle, and a 22mm inside diameter. The saws are ground with ultra-precision tolerances, with thickness held to +.0002"/-0.0000". Typical depth of cut per pass is about 4 times the saw thickness. If the total depth of cut is more than 5 times the saw thickness or you need to have a slitting saw with the highest performance see the
MK100-22-36 series saw. The recommended maximum total depth of cut with a M100-22-36 using an
MSA-22 saw arbor is 1.230".
