63mm Diam. Slitting Saw, 6mm Thick, 16mm ID, 28 teeth
Our precision ground 63mm diameter solid carbide saws are best used for non-ferrous materials, such as aluminum, copper, and plastics. They have 28 teeth with a 10 degree rake angle, and a 16mm inside diameter. The saws are ground with ultra-precision tolerances, with thickness held to +.0002"/-0.0000". Typical depth of cut per pass is about 4 times the saw thickness. If the total depth of cut is more than 5 times the saw thickness or you need to have a slitting saw with the highest performance see the
MK63-16-28 series saw. The recommended maximum total depth of cut with a M63-16-28 using an
MSA-16 saw arbor is 0.698".
