80mm Diam. Slitting Saw, 3mm Thick, 22mm ID, 30 teeth
Our precision ground 80mm diameter solid carbide saws are best used for non-ferrous materials, such as aluminum, copper, and plastics. They have 30 teeth with a 10 degree rake angle, and a 22mm inside diameter. The saws are ground with ultra-precision tolerances, with thickness held to +.0002"/-0.0000". Typical depth of cut per pass is about 4 times the saw thickness. If the total depth of cut is more than 5 times the saw thickness or you need to have a slitting saw with the highest performance see the
MK80-22-30 series saw. The recommended maximum total depth of cut with a M80-22-30 using an
MSA-22 saw arbor is 0.836".
